7
Assembly
• Place a cap nut on the end of the grill axle. Tap the cap
nut with a hammer to secure the cap nut on the end of
the grill axle.
• Pull on the cap nut to be sure it is secure on the grill axle.
• Fit the door peg into the hole in the frame.
• Turn the dashboard face down.
• Fit the steering wheel retainer to the dashboard.
• Insert two #8 x
3
/
4
" screws through the steering wheel
retainer and into the dashboard. Tighten the screws with
a Phillips screwdriver. Do not over-tighten.
• Fit the dashboard onto the top of the frame.
• Make sure the hinge on the top side of the door is captured
by the dashboard.
• Insert six #8 x
3
/
4
" screws through the dashboard and into
the frame. Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
Cap Nut
Steering
Wheel
Retainer
Dashboard
Grill Axle
Door
Peg
Door
Dashboard
Hole
Frame
Frame
Door Hinge
16
14
15
17