Fisher & Paykel WL26CW1, Руководство по дополнительному обслуживанию

Страница: 26 / 41

517794B
26
14 DIAGNOSTIC MODE
To enter the
DIAGNOSTIC MODE , turn the
power on at the power point and off at the
console.
Press and hold the
HI-EFFICIENCY button and then press the SELECT button. Keep the buttons
pressed for at least 2 seconds, after which time two beeps will sound and the screen on the right
above will appear.
Use the left and right arrows to highlight the screen you wish to view, then press the select button
to enter that screen.
The screens are explained below.
14.1 Service Screen
Upon entering the service screen, one of the following screens will appear
•
Warning Status / Fault Status
•
Machine Status
To scroll between the screens use the left and right arrows.
14.1.1 Warning Status Screen / Fault Status Screen
Warning Status
In this screen will be displayed the last USER
WARNING FAULT that occurred and will show
how many cycles ago and in what part of the
cycle it occurred.
The User Warning Faults are as follows:
•
No Faucets
•
Overloaded
•
Out Of Balance
•
Over Suds or water still in the machine
during spin
•
No Hot Water
•
No Cold Water
•
Agitate Overloaded
Fault Status
In this screen will be displayed a fault code for
the last fault that has occurred and will show
how many cycles ago and in what part of the
cycle it occurred.
The fault code number can now be checked in
the detailed fault codes, to ascertain what
repairs may be necessary.
Press & Hold for 2 seconds