CHANGING PRE-SET OPTIONS
19
If your cold water temperature is very low you will not
get a very effective wash. The controlled cold option
solves this problem by adding a small amount of hot
water to raise the temperature of the wash. We have
called this ‘Controlled Cold’.
1. Select COLD wash temperature.
2. The Wash Progress lights show the temperature
adjustment possible.
•
When the first progress light is on, the
machine will fill with cold water only.
•
Press ADVANCE to select the second light and
your Smart Drive will control the temperature
to approximately 20˚C. Each following light
equals approximately a 1˚C temperature rise.
The beeps signalling the end of the cycle can be
increased or decreased. Press the options button up
to increase beeps or down for no beeps.
You can increase or decrease the volume of water added
during the rinse on the Water Saver option.
If you are not satisfied with the level that your
Smart Drive fills to on Auto Water Level, you can
increase or decrease the fill level that Auto will select.
Note
: If you feel there is not enough water for the
load, we recommend you check by pausing the
machine and pushing the clothes down to see how
much spare water is at the bottom of the bowl.
Clothes often float and your Smart Drive can sense the
water under the clothes.
22
CONTROLLED COLD
-
models only
END OF CYCLE BEEPS
-
models only
WATER SAVER
-
models only
Note:
If you always use
cold or controlled cold
water, we recommend
that a warm or hot wash
be used regularly,
eg. every 5th wash should
be at least a warm one.
Cold Only
Controlled Cold
Light on
FAVOURITE
PERM. PRESS
WOOL
DELICATE
HEAVY DUTY
Option
less water
factory setting
more water +
more water ++
more water +++
AUTO WATER
FILL LEVEL
-
models only
21
2408 SmartDrive U&C.qk 15/3/02 09:38 Page 21
