CUSTOMISING THE WASH CYCLES
15
-
models only
You can program your Smart Drive to remember the
wash options you prefer for each wash cycle.
For instance, you may want to set the Regular cycle to
a cold wash or set Heavy Duty to include a soak.
1. Press POWER.
2. Press the wash cycle button.
Hold down for 2 seconds.
You will hear 2 quick beeps and the wash cycle
light will flash.
3. Select your wash options, (eg cold wash, soak).
4. Press the wash cycle again to store your
customised cycle.
To change your customised wash cycle simply repeat
these steps.
When you are customising a wash cycle you can
shorten or lengthen the agitation time.
•
To shorten the agitation time, press ‘ADVANCE’ to
reduce the number of wash progress lights.
•
To increase the agitation time keep pressing
‘ADVANCE’ until all the wash progress lights are on
(See page 9).
Note:
Unlike the Favourite cycle you cannot customise
a wash cycle to start at the rinse or spin stage.
On Heavy Duty and Wool you can only decrease the
wash time.
TO CUSTOMISE A CYCLE
2408 SmartDrive U&C.qk 15/3/02 09:38 Page 17
