4
SAFETY AND WARNINGS
IMPORTANT SAFETY INSTRUCTIONS!
Save these instructions for the local inspectors use.
To avoid hazard, follow these instructions carefully
before installing or using this appliance.
y
Make this information available to the person
installing the appliance – doing so could reduce your
installation costs.
y
This oven is to be installed and connected to the
electricity supply only by an authorised person.
y
If the installation requires alterations to the domestic
electrical system, call a qualified electrician. The
electrician should also check that the socket cable
section is suitable for the electricity drawn by the
oven.
y
The oven must be earthed.
y
Installation must comply with your local building and
electricity regulations.
y
This appliance must be installed and connected to
the mains power supply only by a suitably qualified
person according to these installation instructions
and in compliance with any applicable local building
and electricity regulations.
Failure to install the appliance correctly could
invalidate any warranty or liability claims.
y
If the power supply cable is damaged, it must be
replaced by the manufacturer, its service agent or
similarly qualified person in order to avoid a hazard.
y
A circuit breaker is recommended.
y
Do not use adaptors, reducers or branching devices
to connect the oven to the mains electricity supply,
as they can cause overheating and burning.
y
Make sure the cavity is completely sealed with no
gaps. This is to ensure the oven cooling system
functions correctly.
