36
TROUBLESHOOTING
OVEN PROBLEM
PROBLEM SOLVING STEPS
Other F__ Error appears in the
display window
Remove power and turn it back on again after
a few seconds. If condition persists, note the
code number (in the EVENT LOG list) and contact
Customer Support or your authorised repairer.
The oven display won’t turn on
Turn off power at the main power supply,
then turn the power back on.
If this does not resolve the issue, call
Customer Support or an authorised repairer.
The cooling fan continues to run
after the oven is turned off
The fan will turn off automatically when the
electronic components have cooled sufficiently.
Oven is not heating
Check the circuit breaker or fuse box to your house.
Check that power is being supplied to the oven.
Make sure the oven temperature has been selected.
Oven is not cooking evenly
Refer to cooking charts for recommended
rack position.
Always reduce recipe temperature by 15°C
when baking with Fab Heat mode.
Oven light is not working properly
Check that power is being supplied to the oven.
Refer to the clock section of this userguide.
Clock and timer are not working
properly
Make sure there is proper electrical power to
the oven.
Excessive moisture
Using the convection mode will eliminate any
moisture in the oven.
Turning off demo mode
To disable the function, press the arrows
to enter the DEMO display page and select off.
Confirm your selection by pressing
.