Fig. 6a
Fig. 6b
Connecting the Feeder Cable
To connect the feeder cable to the cooker:
• Remove the four screws that hold shield “A” behind the cooker.
• Open the cable clamp “D” completely.
• Check the position of the U bolts on the terminal block “B” (Fig. 7a) according to the diagram in Figs. 7b and Fig.
7c.
• Insert the feeder cable into the cable clamp “D” and into the cable protector “C”. The supply cable must be of a
suitable size for the current requirements of the appliance; see ‘Feeder Cable section’ following. Connect the
phase and earth cables to terminal “B” according to Figs. 7b and 7c.
• Pull the feeder cable and block it with the cable clamp “D”.
• Re-mount shield “A”.
The earth conductor must be left about 30 mm longer than the others.
Updated: Fri, 15 Jan 2021 11:10:49 GMT
Powered by
9
