background image

15

FABRICSMART™ WASHER SAFETY FEATURES

Lid lock

The lid of your FabricSmart™ washer is locked for some 
parts of the wash cycle, ensuring safety for you and your 
family while it is operating.

The ‘Lid Locked’ light (above the 

 button) is illuminated 

when the lid lock is activated, letting you know at a glance 
if you can open the lid or not.

To unlock the lid at any time during the cycle touch 

 

If the lid is left open, your FabricSmart™ washer will be unable to lock the lid, and the 
cycle will be halted. The washer will beep to alert you and display a warning message on 
the screen. If this occurs, close the lid and touch 

 .

Note: the lid will be locked from the start of the ‘Bowl Clean’ cycle, through to the end, 
unless 

 is touched.

ImpORTANT!

Do not put anything down the lid lock slot in the top deck of your washer.

Do not try to disable the lid lock.

Ensure that children or infirmed persons are well supervised when around your 
FabricSmart™ washer.

Auto drain

Unsupervised clothes washers filled with water can present a drowning hazard to small 
children. In order to minimise any risk of this type of accident, your FabricSmart™ 
washer has been pre-programmed to know when this potential hazard is created and 
drains the wash water to a safe level.

If you pause or power off your FabricSmart™ washer at any time during the wash cycle 
when there is water in the bowl, the washer will activate the auto drain function after 
3 minutes. This will drain the water in the wash bowl to an acceptable level, minimising 
any potential hazard.

A warning message 

 will be displayed on the digital display while auto drain is in 

operation. The cycle can be restarted at anytime by touching 

 .

Lid Lock

Содержание FabricSmart WA8060P

















































Отзывы: