21
TROUBLESHOOTING
The DishDrawer is beeping continuously
z
Refer to the ‘Fault codes’ section of your User guide
No program indicator lights up when the drawer is opened
z
Ensure power is connected and is switched on.
z
AUTO POWER-ON
may need to be activated. Refer to your User guide for details.
Drawer doesn’t close properly
z
Ensure nothing is obstructing the drawer from closing such as hoses or drawer latches.
Water appears around water supply and drain connections
z
Check hoses, connections and existing plumbing for leaks.
z
Check rubber washer and hose clamp are correctly fitted.
Product is tipping
z
Ensure the product is secured to the cabinetry.
Front panels are misaligned to surrounding cabinetry
z
Check the cabinetry is square. Check and relevel product. Unscrew the product from the
cabinetry. Adjust the feet to level the product, then re-secure to the cabinetry.
z
If a problem occurs that is not listed, refer to your user guide for additional troubleshooting
If after checking these points, you still need assistance, please refer to the Service &
Warranty book for warranty details or contact us through our website fisherpaykel.com
DISPLAY
POSSIBLE CAUSE
WHAT TO DO
RINSE
+ all modifiers
A1:
Water Supply fault.
1
Ensure the water supply is
turned on.
2
Press once to stop the beeping,
then again to clear the fault.
3
Press to resume the
wash program.
DELICATE
,
RINSE
+ all modifiers
A3:
Drawer cannot
drain. The drainage
hose may be
blocked or kinked,
or the connection to
drainage pipe may
be blocked.
1
Check the drainage hose and
connection for any blockages.
Ensure the spigot is drilled out.
2
Press once to stop the beeping,
then again to clear the fault.
3
Press to resume the
wash program.
FAST
,
DELICATE
+ all modifiers
A6:
The spray arm has
loosened or come off
its mounting, or water
pressure is too low, or
a combination of low
water pressure and
excessive foaming.
1
Open the drawer and check the
spray arm.
2
If the spray arm has loosened
or come off its mounting,
re-fit it. Check that it is firmly
seated and turns freely.
Refer to ‘Maintenance’ in your
user guide.
3
Press once to stop the beeping,
then again to clear the fault.
4
Press to resume the
wash program.
