12
CABINETRY PREPARATION
SERVICE ACCESS
REAR
WALL
SHELF*
PROFILE
A
B
C
D
z
Service holes can be created on either side of the DishDrawer™ Dishwasher cavity
as shown below.
z
If the hole is created through wood, ensure the edges are smooth and rounded.
z
If the hole is created through metal, ensure the edge protector is fitted.
Align the supplied moisture protection
tape to the cabinetry as illustrated
Ensure this area is free of debris
before carefully applying the tape to
the surface.
1
MOISTURE PROTECTION
SIDE PARTITION
SELECT CABINETRY SECURING METHOD
1
Recommended method*
*frameless cabinetry only
METHOD A
Secure to cabinetry via brackets
METHOD B
Secure via drawer removal
If securing via the drawer removal method,
ensure the marked locations provide
adequate support.
If there are no side partitions, construct
timber bracing to secure the fixings to.
SERVICE HOLE DIMENSIONS
INCHES
MM
A
Maximum distance between rear of cavity and service hole
1/4
5
B
Maximum distance between shelf and service hole
1/2
10
C
Minimum diameter of hose service hole
2 1/4
57
D
Maximum diameter of power cord service hole
1 1/2
38
*for assisted opening installations, maximum distance should be referenced from the top of the spacer blocks
3/8"
(10mm)
