17
2
3
16mm (x6)
!7
INSTALLING CUSTOM FRONT DRAWER PANELS
1
2
16mm (x3)
!7
-
C
ATTACH CUSTOM PANELS TO PANEL BRACKETS
There must be at least
3 screws used each side.
Align bottom of each custom
panel with the bottom of each
bracket.
!7
-
D
ATTACH KNOCK-TO-PAUSE MODULE
TO CUSTOM PANEL
IMPORTANT!
●
Ensure the Knock-To-Pause
module is orientated correctly
before attaching.
●
Ensure the module is centralized
in the holes and not in contact
with the bracket.
Attach the Knock-To-Pause
module to the back of the custom
panel through the 3 holes cut into
the panel bracket as shown.
Use all 3 screws provided.
