Fisher & Paykel DH8060P, Инструкции по установке и Руководство пользователя

Страница: 27 / 40

25
Cleaning the condenser filter
If the ‘Condenser’ indicator light starts to flash this indicates that the condenser filter
needs to be cleaned. The condenser filter should be cleaned after every five cycles.
The light illuminates when you first turn the machine on, then turns off once the
button has been touched.
To clean the condenser filter:
1
Switch off the power supply and remove
the power plug before cleaning the
condenser.
2
Open the condenser filter cover.
3
Turn the four condenser lock levers 90°
then pull out the condenser filter.
4
Remove rear filter and wipe the surface
clean with your hand.
5
Replace the condenser filter.
6
Turn the four condenser filter lock levers
to lock the condenser filter back in place
again. Make sure that these locks are
engaged securely.
7
Close the condenser filter cover.
Note: if the evaporator behind the
condenser filter is dirty, it can be cleaned
carefully with a vacuum cleaner using a
dusting brush or narrow crevice nozzle.
Cleaning the sensors
There are sensors in your dryer that
detect whether the laundry is dry
or not. These sensors need to be
cleaned periodically (we recommend
approximately four times a year).
To clean the sensors:
1
Open the door of your machine.
2
Allow the machine to cool if drying has
been carried out.
3
Locate the metal sensors just behind the
lint filter.
4
Wipe the sensors with a soft cloth,
dampened with vinegar. Dry the sensors
with a soft dry cloth.
CARING FOR YOUR DRYER
Turning the condenser
filter locking levers
Location of the sensors
Pulling out the condenser filter