Fisher & Paykel DH8060P, Инструкции по установке и Руководство пользователя

Страница: 23 / 40

21
DRYING CYCLE OPTIONS
Indicators
There are a number of indicators to alert you when you need
to attend to your dryer, either to clean the lint filter, empty the
water tank or to clean the condenser filter (refer to the ‘Caring
for your dryer’ section for more information).
Keylock
This option enables you to deactivate the buttons on the display panel, except for the
‘POWER’
and buttons. This option helps prevent accidental button touches.
To turn Keylock mode ON or OFF, at any time when the dryer is powered on:
● ●
Touch and hold the button for 2 seconds.
Note: when activated, the light above the button is illuminated.
If Keylock mode is activated and the machine is powered off:
● ●
To turn your dryer on, press the ‘POWER’ button, then touch and hold the button
for two seconds to turn Keylock mode off. Select your drying cycle, any options and
then touch to start the cycle.
Delay Start
The ‘Delay Start’ option enables you to delay the start of the drying cycle from between
5 minutes and 12 hours. Times you can select are 5 min, 15 min, 30 min, 1 hour, then
hourly up to 12 hours. This can be useful to time your drying to finish when you arrive
home from work, or to start when power rates are lower.
To programme a ‘Delay Start’, simply touch the ‘More’ button to increase the delay
time and ‘Less’ button to decrease the time or to turn ‘Delay Start’ off. Touch
to confirm your selection and start the countdown. Once the ‘Delay Start’ has been
started, the time will count down on the digital display in one minute increments, the
‘Delay Start’ light will flash and the light will stop flashing and remain lit.
Note: if you hold the ‘More’ button down, the time displayed on the screen will
increase after every half a second (more convenient than touching the button
repetitively). To remove a delay start time once it is counting down, simply touch ,
then touch the ‘Less’ button to decrease the time to zero. Touch to start the cycle
immediately.
IMPORTANT!
We suggest that you avoid using ‘Delay Start’ for damp, non-colourfast items as this
may cause dye run to occur.
Indicators