29
BEFORE YOU CALL FOR SERVICE
User warnings
Your dryer is capable of diagnosing a number of its own problems. It will sound a
continuous series of beeps and display a user prompt when it has a problem that
you can correct yourself. To stop the beeps sounding, touch any button on the
control panel. Do not try to continue your drying cycle once you stop the noise.
You must address the problem the dryer is alerting you to. Check the below table
before you call for service.
PROBLEM
DISPLAYED AS
WHAT TO DO
Keylock is
activated
Press for two seconds to deactivate the Keylock.
The door is
not closed
Close the door fully and press .
Try opening and closing the door again.
Reposition the load, make sure the load is correctly in
the drum and that protruding items are not stopping
the door from closing.
Dryer has
been paused
Press
to resume the cycle.
Once you have addressed the issue the user prompt was alerting you to, try using your
dryer as per usual. If the issue persists, call your Fisher & Paykel trained and supported
service technician.
