11
CABINETRY PREPARATION
Align the supplied moisture protection
tape to the cabinetry as illustrated
Ensure this area is free of debris
before carefully applying the tape to
the surface.
1
SERVICE ACCESS
MOISTURE PROTECTION
REAR
WALL
SHELF*
PROFILE
SERVICE HOLE DIMENSIONS
MM
A
Maximum distance between rear of cavity and service hole
5
B
Maximum distance between shelf* and service hole
10
C
Minimum diameter of service hole
57
D
If venting through the adjacent cabinetry, the rear edge of the service hole should be
enlarged by cutting out the bottom corner
*For assisted opening installations, maximum distance should be referenced from the top of the spacer blocks
A
B
C
D
z
Service holes can be created on either side of the DishDrawer™ Dishwasher cavity as
shown below.
z
If the hole is created through wood, ensure the edges are smooth and rounded.
z
If the hole is created through metal, ensure the supplied edge protector is fitted.
10mm
Содержание DD60STX6HI
Страница 1: ...INSTALLATION GUIDE INTEGRATED DD60STX6HI SINGLE DISHDRAWER DISHWASHER BI ...
Страница 2: ......