Fisher & Paykel CI365DT, Инструкция по установке и руководство пользователя

Страница: 22 / 72

20
Using your induction cooktop
To start cooking
2
Touch the ON/OFF control of the
cooking zone.
The ON/OFF indicator will glow.
1
Place a suitable pan on the
cooking zone you wish to use.
Make sure the bottom of the pan
and the surface of the cooking
zone are clean and dry.
OR
3
Select a heat setting by touching or .
If you touch , you will start out at the lowest heat setting (1).
If you touch , you will start out at the highest heat setting (8).
The number of indicators in the ‘crescent’ corresponds to the heat setting
(eg two indicators = heat setting 2).
You can modify the heat setting at any time during cooking.
If you don’t choose a heat setting within 10 seconds, the cooking zone will automatically turn
off. Start from step 2 again.
Tip: to clear a cooking zone’s heat setting quickly, touch its and controls together. If you
do not select a new heat setting within 10 seconds, the cooking zone will automatically turn off.
If the ‘No pan’ indicator glows
This means that:
you have not placed a pan on the correct cooking zone or
the pan you’re using is not suitable for induction cooking or
the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The cooking zone will automatically turn off after 30 seconds if no suitable pan is placed on it.
US
CA
‘No pan’ indicator
ON/OFF indicator