Regulator and Hose Replacement
The pressure regulator and hose assembly supplied with the unit must be used. If replacements are needed, contact
Customer Care. See section ‘Service’ for contact details. Do not use the grill if the odour of gas is present. If the unit is
LPG, screw the regulator into the cylinder and leak check the hose and regulator connections with a soap and water
solution before operating the grill. Turn all knobs to “OFF” then turn on the gas supply. If LPG, is there gas in the
cylinder?
• Always keep your face and body as far away from the grill as possible when lighting.
• DO NOT leave the grill unattended while cooking.
• Keep a spray bottle of soapy water near the gas supply valve and check the connections before each use.
• Do not attempt to light the grill if the odour of gas is present.
• Wait 5 minutes before relighting a hot grill.
Before each use, inspect the gas supply piping or hose prior to turning the gas “on”. If there
is evidence of cuts, wear, or abrasion, it must be replaced prior to use.
Grill Grates:
Method 1:
Turn on “HI” for 15-20 minutes to burn any remaining food particles. After turning the grill “OFF”, use a
bristle barbeque brush to remove any remainin food particles or ash.
Method 2:
The easiest way to clean the grill is immediately after cooking is completed and after turning off the
flame. Wear a barbeque mitt to protect your hand from the heat and steam. Dip a soft brass bristle barbeque
brush in a mixture of 2 cups of tap water and 1/2 cup of vinegar and scrub the hot grill. Dip the brush frequently in
the bowl of water and vinegar. Steam, created as water contacts the hot grill, assists the cleaning process by
softening any food particles. The food particles will fall onto the ceramic rods and burn or fall into the drip pan. If
the grill is allowed to cool before cleaning, cleaning will be more difficult.
Method 3:
Take about 30 cm of aluminum foil, crumpled up in a ball and rub it over cooled grates to release food
particles.
Grill grates must be re-seasoned after cleaning to prevent rust stains.
Ceramic Rods:
It is not necessary to remove the ceramic rods for cleaning. They burn themselves clean during the next cooking
Updated: Mon, 17 Aug 2020 01:44:59 GMT
Powered by
5
