Fisher & Paykel AeroDry, Инструкция по установке и руководство пользователя

Страница: 17 / 24

15
Temperature settings
This dryer has 3 temperature settings; Regular, Low
and Airing.
■ ■
The Regular setting is for drying most fabrics.
■ ■
The Low setting is for drying delicates and synthetics.
It outputs half the amount of heat compared to the
regular setting, so the temperatures are lower for
maximum care of the fabrics.
■ ■
The Airing setting is a cycle designed to freshen up
garments. The airing setting operates only on the
1 hour manual cycle.
The Regular and Low settings will operate on both
the manual and the auto-sensing cycles.
Delay start
DELAY START will delay the start of the drying cycle
by 3, 6 or 9 hours.
1
Select drying cycle.
2
Press DELAY START once for a delay of 3 hours. Press
again for 6 hours, a third time for 9 hours and again
to return to normal.
Selecting DELAY START will cancel the ‘beeping’ at
the end of the cycle.
Note: the DELAY START will not operate when the
1 hour manual cycle is selected.
Important!
Do not leave non-colourfast materials to sit wet in
the dryer as the dye may run.
Wrinkle free
Use WRINKLE FREE to minimise the creasing that
occurs when the clothes are left to sit in the dryer.
At the end of the cycle the drum will rotate briefly
every 5 minutes while cool air is blown through the
clothes. WRINKLE FREE will continue for 12 hours or
until the dryer is turned off. The dryer will beep to
remind you that the cycle is finished.
WRINKLE FREE can be turned on or off at any time
during the cycle.
AeroSense™ dryer