FB25033 & FB25034
Jeep® JK Wrangler
JK Grab Handles
2503300
FB25033:
Front Grab Handles Only
FB25034:
Front and Rear Grab Handles
REQUIRED TOOLS
6mm Allen Key
13mm Socket
*5mm Allen Key
*10mm Socket
KIT CONTAINS
Front Grab Handle
M8 Bolt
*Rear Grab Handle
*M6 Bolt
*M6 Flat Washer
QTY
2
4
2
4
4
* For FB25034 only
1)
INSTALL FRONT GRAB HANDLES (FB25033 &
FB25034)
CAUTION:
These grab handles require using tools very close to
your windshield. Use extreme caution when
installing to ensure you do not damage your
windshield while installing. If needed, a piece of
cardboard can be used to help protect your
windshield from an accidental slip of the wrench.
On the passenger side, begin by removing the A-
pillar bolt and roof bolt shown:
NOTE:
The factory uses a thread sealant on these bolts. It is
best to run the supplied hardware in and out of the
holes a few times to clear the threads and make the
install easier.
Fronts
Rears
