5 | Parameterization
FISCHER Mess- und Regeltechnik GmbH
36 / 88
BA_EN_EA16
B. Assignment to the colour changes
Menu path: Main menu/Configuration/Switch outputs/Switch output 1
Switch output 1
Assignment Colour change
Contact type: NO
Function: Hysteresis
3. Level
4. Level (Parameter)
1
2
3
5
Switch delay
0.000 s
input
Colour change: red
4
Channel 1
6
v
Channel 2
7
v
Channel 3
8
v
Channel 4
9
v
Fig. 53:
Menu Switch output 1 (Assignment: Colour change)
Pos. Value range
Description
1
Assignment Input: 1
Assignment Input: 2
Assignment Input: 3
Assignment Input: 4
Assignment: Colour
change
Assignment Input: -
This parameter is used to assign the switch
output 1 to a colour change
2
Contact type: Make con-
tact
Contact type: Open con-
tact
This parameter defines whether or not the
switch output 1 works with an open contact
or make contact.
3
Function: Hysteresis
Hysteresis function
Function: Window
Window function
4
Colour-change: red
Colour-change: yellow
This parameter is used to define which col-
our change the switch output responds to.
5
Switch delay
0 = OFF
0.01 … 10800 s
A switch delay of the switch output can be
defined in 10 ms steps with this parameter.
6
Channel 1
Yes
No
These parameters can be used to set
whether or not the colour change of the re-
spective channels should be monitored.
7
Channel 2
Yes
No
8
Channel 3
Yes
No
9
Channel 4
Yes
No
