Page 8
Caution:
The user is not able to delete a
forgotten password!
A configuration saved by the user can
be loaded via the menu item
Load config.
For in-
stance, a functional set of parameters can be re-
stored after configuration attempts.
Note: If the user has not yet saved a
configuration, the default values (status
on delivery) are loaded. In this case, any
measuring range spreads or switch
points are reset and the device needs to be newly
configured.
Save config.
is used to save the existing parame-
ters in a protected part of the memory. This is help-
ful if the settings of a functional device are to be op-
timised.
Save config.
and
Load config.
can be
used to restore the original status quickly.
6
Maintenance
The instrument is maintenance-free.
We recommend the following regular inspection to
guarantee reliable operation and a long service life:
•
Check the reading.
•
Check the function in combination with down-
stream components.
•
Check the leak-tightness of the pressure con-
nection lines.
•
Check the electrical connections.
The exact test cycles shall be adapted to the oper-
ating and ambient conditions. If various instrument
components interact, the operating instructions of
all the other instruments also need to be observed.
7
Transport
The instrument must not be exposed to mechanical
shocks. It may only be transported in packaging
specifically intended for transport.
8
Service
All damaged or faulty instruments must be sent di-
rectly to our repair department. Please coordinate
all shipments with our sales department.
Process media residues in and on
dismantled devices can be a hazard
to people, animals and the environ-
ment. Take adequate preventive
measures. If required the instruments
must be cleaned thoroughly.
9
Accessories
•
Connection cable with M12 connector
•
Assembly set for wall mounting
•
Adapter for parameterisation via PC software
10 Disposal
For the sake of the environment ....
Please help to protect our environ-
ment and dispose of or recycle used
instruments as required by the appli-
cable regulations.
