Page 4
During the programming process, the menu items
and the associated parameters are shown on the
display. The device continues to function whilst the
parameters are being set; apart from one exception,
the changes come into effect instantly. The excep-
tion is the change of switching times - in this case,
the previously valid time must have run down first.
5.2
Configuration
For commissioning there is a multitude of setting
options for optimum adaptation of the device to the
measuring point and task at hand. To make the in-
put easier, the individual parameters are summa-
rised into groups in the menu.
Depending on the device model (power output /
voltage output / contacts), some menu items may
not be available.
5.3
Operation
It is operated via the buttons
ÿ û
and
þ
.
In normal mode, press the button
û
to enter the
menu. (After pressing the button
û i
t may be nec-
essary to enter a password via the buttons
þ
and
ÿ
and to confirm this password with the button
û
.)
The individual menu items and parameters can be
displayed using the buttons
þ
and
ÿ
. The respec-
tive menu item is selected or the parameters for
making changes are called up via the button
û
.
If a parameter can be changed, the display flashes.
The change is made via the buttons
þ
and
ÿ
. The
value is saved with the button
û
.
To leave a menu level or the entire menu, select
"Quit" and press
û
.
Example: Setting the switch points
In normal mode, press the button
û
to enter the
menu.
Menu level Switch points
appears in the
display; to change the switch points press the
û
button again and the parameter
Switch point 1 on
is shown.
Select other parameters with the buttons
þ
or
ÿ
. If
the parameter that is to be changed is displayed,
press the button
û
again.
The device jumps to the input:
•
The parameter is stated in the first line.
•
The value that is to be changed is shown in the
second line, the display flashes.
•
The input limits are displayed in the 3rd line (if
there is one).
The required value is set with the buttons
þ
and
ÿ
and then confirmed with
û.
5.4
Menu
Switch points
Switch point 1 On
Switch point 1 Off
Switch point 1 Delay
Switch point 1 Function
Switch point 2 On
Switch point 2 Off
Switch point 2 Delay
Switch point 2 Function
Input
Damping
Offset correction
Zero-point window
Measurement
Start of measuring range
End of measuring range
Unit
Limitation
Output
min. output
max. output
error signal
Function
Function
free unit "Decimal places"
free unit "Start of measuring range"
free unit "End of m
easuring range“
free unit "Unit"
Table: Number of value pairs
Table: Value pair 1
…
Table: Value pair n
Display
Colour Auto1:
red-green switchover
green-red switchover
Colour Auto2:
red-yellow switchover
yellow-green switchover
green-yellow switchover
yellow-red switchover
Hysteresis (for colour change)
Delay (for colour change)
Colour
Illumination time
Contrast
Bargraph