Fischer Panda Panda 4800i PMS, Руководство пользователя, Страница: 136 / 180

General operation
Page 136 - Chapter 2: General operation 14.2.13
Fig. 2.1.1-2: Hardware version, generator type, and software version in default display
Note: Example:
Hardware version:2

iControl2 controller
Generator type:01

Panda 5000i PMS
Software version: 2.0

iControl2, compatible with iControl-
Panel2
2.1.2 The default display screen
Five seconds after the controller is switched on, the display will change to the default display screen. On the default
display screen, you will find information on the battery voltage, operating hours of the generator, temperatures of
cylinder head, exhaust manifold, and winding, RPM, and the oil pressure status. Also, a bar graph display at the right
hand edge of the display shows the utilisation of the generator in percent.
Data output on the default display screen:
• Battery voltage (supply voltage)
• Status field for operating modes (stand-by, pre-heat, starting, override, running, autostart, stopping)
• Operating hours of the generator
• Oil pressure status
• Cylinder head temperature
• Temperature of exhaust manifold
• Winding temperature
• Speed/RPM
• Utilisation in percent