Operation Manual
FW-1200-M
© 2012
First Water Systems, Inc
pg. 5
3.2 Component Layout
Arrange components in the following order, flowing from source
water to water outlet:
1
Water Source
2
Source Water Hose (green w/ foot valve)
3
Pump (Remove from Purification Unit mount and place as close
to water source as possible)
4
Transfer Hose (green)
5
Water Purification Unit
6
Clean Water Hose (clear/food grade)
7
Clean water distribution
Included Cam Lock to Garden Hose Thread adaptors may be used to
convert to conventional garden hoses at the inlet and outlet. See
section 3.3
3.3 Connections
The FW-1200-M uses 1” Cam Lock fittings as standard. Adaptors are
provided to convert to standard garden hose fittings.
Cam Lock to Female Garden Hose Thread (GHT) Fitting
o
Used on the end on the Transfer Hose (green). Using
this fitting to treat water from a pressurized source,
bypassing the pump.
Cam Lock to Male Garden Hose Thread (GHT) Fitting
o
Used at the end of the Clean Water Hose (clear).
Adapts the system outlet to standard garden hose
thread.
You may bypass the pump and treat water from existing building
pressure when under a boil water advisory or similar circumstance.
