First Water FW-1200-M, Руководство по эксплуатации

Страница: 13 / 17

Operation Manual FW-1200-M
© 2012 First Water Systems, Inc pg. 11

Drain Pump:
o
Remove Pump Strainer Basket
o
Remove Pump Drain Port.
o
Remove Pump Priming Port.

Discard used filters.

Rinse and dry all components.

Leaving Canisters open, allow system to air dry for at least 8
hours, longer if necessary to ensure the unit is completely
dry.
4.4 Preparing for Storage

Visually inspect the UV Bulb and Quartz Sleeve.

Inspect and lubricate each (4) Canister O-Rings with Silicone
Grease or other food grade lubricant.

Place new filters in each Canister and screw the Canisters
back on the unit.
o
Tighten Canisters hand tight only.

Coil and store all hoses and accessories.
The FW-1200-M should be stored ready for deployment. The
following checklist will ensure that your FW-1200-M is properly
stored.

Used filters discarded
 New filters installed

Unit clean and dry

Canister O-Rings lubricated and in place
 UV Lamp operational

Hoses and Accessories accounted for

Replacement filters re-ordered