First Light C-RED 2, Быстрый старт

Страница: 8 / 14

9. POWERING UP/DOWN
Power ON:
When the power LEMO is connected to the camera, and the power supply to the line plug, the camera is ON.
Power OFF:
Please use the CLI command “shutdown” from a simple terminal before turning off the camera. First unplug
the power supply from the line plug, then unplug the LEMO cable from the camera.
10. CAMERA CONTROL
Demo GUI software
The Graphical User Interface (GUI) demo software is provided in the USB key supplied with C-RED 2, or
available on demand at
support@first-light.fr .
Camera status
Once the camera is properly powered up the system boots and C-RED 2 is ready to operate.
A white or purple diode signal, visible through the camera’s body holes, confirms the operability.
Camera status Camera’s led color Description
Configuring Blue Camera starting
Operational Green Camera configuration is applied
Operational (cooling) White Camera is cooling down
Operational (cold) Purple Camera has reached target temperature
Operational (throttling) Purple double blink Because of temperature environment, the camera can’t
reach the set point and is limiting itself to the lower
possible temperature
Safe Red double blink
The camera detects an error. The detector is turned off. To
be able to reuse the camera, you must restart it.
Prevsafe Yellow When you restart the camera after a safe state, the
camera will be stopped in prevsafe state. You have to use
the
continue
command to resume the camera starting.
Locked Red The camera detects a critical error. The camera is
unusable, please contact First Light Imaging for support.
Safe (rescue FW) Orange double
blink
The camera detects a critical error. The camera is
unusable, please contact First Light Imaging for support.