First Degree Fitness VX Pro, Руководство пользователя

Страница: 8 / 18

8
Fill tank as shown left. Use the Yellow plug only
for filling.
Fill with adjuster handle at level 16 only.
Once filling is complete, use a coin or large blade
screwdriver to tighten tank plug into place.
Siphon valve
Tank Filling and Water Treatment
1. Filling requires a large bucket (not supplied) and the Fluid Rower siphon (included).
Filling will take approximately 7.6 liters of water.
2. Unscrew the yellow plug on the tank back and insert the flexible tube into the rear of
the tank while keeping the rigid hose in the bucket. Note: The siphon tube may be
impeded by one of the impeller blades. Use the siphon only to push the impeller down
slightly.
Note: Where water quality is known to be poor, FDF recommends the use of dis-
tilled water.
3.
Move the adjuster handle to level 16, and begin filling. Note : The siphon valve must
be closed to allow siphoning action to occur. Tip: Placing the bucket in an elevated
position will allow the siphon to continually pump water into the tank.
Do not fill past
the calibration mark indicated on the tank!
Note: Opening the siphon valve will stop the pumping action. Use this feature to
avoid water spillage when nearing filling completion.
4, Once filling is complete (to the proper calibration level as indicated on the tank), follow
water treatment schedule as shown.
Note: the lower tank plug is permanently sealed.
Warning:
Do not for any reason insert fingers into the tank!
Water Treatment Procedures:
1. Add Chlorine Tablet.
2. Enough Chlorine Tablets are supplied for many years of Water treatment. Add a
chlorine Tablet whenever the Water appears dirty or cloudy.
WARNING: Only use First Degree Fitness Supplied Water treatment tablets.
Use a drop cloth under the tank when filling the tank to avoid
damage floor or carpet
Caution: