First Degree Fitness VX Pro, Руководство пользователя

Страница: 17 / 18

17
Replacing the VX-PRO Bungee Shock Cord
Bungee wrapping in order:
1. Rope/Bungee Pulley to upper rear right Bungee Pulley.
2. Upper rear right to lower rear right and left rear Pulleys.
3. Lower left rear to upper left rear Pulley.
4. Upper left rear to lower middle left and right Pulleys.
5. Middle right Pulley to upper right front Pulley.
6. Upper front right Pulley to lower front right and left Pulleys.
7. Lower left front Pulley to upper left front Pulley.
8. Upper left front Pulley to tie off point.
Hint: Keep a slight
tension on the Bungee
Cord when threading
through the Bungee
Pulleys
.
2
1
3
4
6
5
Finish the Bungee re-
wrap by tying off the
Bungee. You may
elect to not use a tie
wrap as the metal tab is
designed as a stand
alone attachment point.
Thread the Bungee
through to desired ten-
sion and thread the
Bungee end through
the upper hole as
shown.
8
7
Reattach the Mag-
netic Ring and
Rear Mainshaft
Bolt. Tighten se-
curely.
Finally, reattach
the Sensor Lead
and replace the
Perspex rear cov-
er.