12
Assembly Instructions
STEP 3
Assemble Rowing Seat
CAUTION
The Rower Seat[3] is
Heavy. Use Both Hands
and Keep Fingers Clear
of the Rower Channels
When Guiding the Seat
down the Seat Rails.
a) Slide the assembled Seat Rails[2] facing in the direction of
the arrow in the above graphic. The Seat indentation Must
be towards the rear of the Rower.
Indentation
c) Secure the Rear Leg from the inside with the M6x20
mm Bolts[13] and M6 Washers[10].
Note: Third Bolt hole on
right of Rear Leg and
Seat Rail is for Bungee
Hook Attachment
STEP 4
Install Rear Leg
REQUIRED
Rear Leg [4]
4 x M6 Washers [10]
4 x M10 Washers [11]
4 x M6x20mm Bolts [13]
4 x M10x47.5mm Bolts [15]
a) Mount the Rear Leg[4] onto the Seat Rails and secure
as shown.
Rear Leg
b) Install all M10x47.5mm Bolts[15] and M10 Washers[11]
first from the outside to hold the Rear Leg[4] in position.
