background image

6  

 

Safety

 

Proper Usage 

•  Do  not  use  any  equipment  in  any  way  other  than  designed  or  intended  by  the                

manufacturer.  It  is  imperative  that  FIRST  DEGREE  FITNESS  equipment  is  used          

properly to avoid injury. 

•  Injuries  may  result  if  exercising  improperly  or  excessively.  It  is  recommended  that  all       

individuals consult a physician prior to commencing an exercise program. If at any time   

during exercise you feel faint, dizzy or experience pain, STOP EXERCISING and consult   

your physician. 

• Keep body parts (hands, feet, hair, etc.), clothing and jewelry away from moving parts      

to avoid injury. 

•  Follow  instructions  provided  in  this  manual  for  correct  foot  position  and  basic  rowing   

techniques. 

•  For  more  detailed  rowing  techniques,  please  refer  to  our  International  website 

www.firstdegreefitness.com 

Inspection 

• DO NOT use or permit use of any equipment that is damaged and/or has worn or broken 

parts. For all FIRST DEGREE FITNESS equipment use only replacement parts supplied by    

FIRST DEGREE FITNESS. 

• EQUIPMENT MAINTENANCE 

- Preventative maintenance is the key to smooth operating 

equipment  as  well  as  to  keep  your  liability  to  a  minimum.  Equipment  needs  to  be              

inspected at regular intervals. 

• Ensure that any person(s) making adjustments or performing maintenance or repair of    

any kind is qualified to do so. 

• DO NOT ATTEMPT TO USE OR REPAIR ANY ACCESSORY APPROVED FOR USE WITH THE 

FIRST DEGREE FITNESS EQUIPMENT WHICH APPEARS TO BE DAMAGED OR WORN. 

• Check regularly and follow all instructions for maintenance as specified in this manual.

 

•  Replace  immediately  any  defective  parts  and  do  not  operate  unit  until  all  repairs  are     

complete. 

Operating Warnings 

•  Keep  children  away  from  the  equipment.  Parents  or  others  supervising  children  must     

provide close supervision of children if the equipment is used in the presence of children. 

• Do not allow users to wear loose fitting clothing or jewelry while using equipment. It is    

also  recommended  to  have  users  secure  long  hair  back  and  up  to  avoid  contact  with      

moving parts. 

• All bystanders must stay clear of all users, moving parts and attached accessories and 

components while machine is in operation. 

•        

WARNING Do not insert fingers into Tank! 

 

Содержание E820A

























Отзывы: