4 Payment application setup
If the First Data Payment Application is installed on the FD40 the following features will be available.
4.1 Application startup
After power is applied to the FD40, the Terminal will initialise the Operating System and start the Payment
Application. This will take 30 seconds and the Terminal will show the boot up screen.
4.2 Application idle screen
Once the Terminal has completed initialisation, the following payment Application Idle Screen will be
displayed.
Actual date and time will be displayed and the LED besides the time will show the status of the device. If
the left LED is green it means that the device is able to communicate via USB (does not mean that the USB
is connected). The right green LED indicates that the FD40 Application was initialised by the Clover Station
after it was powered up – only if both LED’s are green can a transaction be performed.
4.3 Set date and time
This feature is used to set the Terminal’s local date and time. Press Date/Time
Set Date/Tim e screen
Verify the date and time (24 hour clock) - If correct, select OK. If the date and time is not correct simply
select the X and update the date and time.
