First Choice T2 Polis MC18, Руководство пользователя

Страница: 18 / 42

17
7. FUNCTIONS
7.1. SYSTEM FUNCTIONAL STATES
7.1.1. Standby on/off button
When on standby the panel is powered but no system function is
enabled. The general remote switch is disabled and the message OFF
is displayed on the set display
on the control panel along with the
current time on the display with flashing seconds dot (between
the second and third figure, ½ second on, ½ second off).
All buttons on the panel are disabled except for the button (system
on) and the key, pressure on which will bring the system to clock
setting mode (see “programming” section).
Pressing the button, the system comes on, the last SET temperature
programmed is displayed on the set display
, and the cycle used
prior to switching the oven off is displayed on the display.
7.2. SETTINGS
7.2.1. Set temperature setting
To set the SET temperature use the and buttons until the desired
baking temperature appears on the
display.
7.2.2. Upper and lower element setting
Pressing the buttons varies the time the oven heating elements
remain on. Each time the button is pressed increases this value by 1
unit, up to a maximum of 9 units. Further pressure returns the value to
0.
NB. Each unit on the two displays corresponds to 5 seconds element on
time. For the remaining units the elements remain off. The total duration
of the cycle is 45 seconds.