IS 514 ECN 3706
Page 12 of 20
Oven Burner Components
Ignitor Electrode
To remove the ignitor (IG16) electrode remove the lead from the electrode
Remove the retaining screw FAS360 and nut FAS016
Replace the ignitor, secure and refit the lead
Thermocouple
Loosen the lock nut at the tip side of the thermocouple (TC33) and withdraw from the burner
bracket
Remover the control knobs and fascia panel
Loosen the thermocouple nut at the thermostat
Bind the new thermocouple thermostat end to the tip of the old thermocouple and gently feed old
and new through into position
Remove the binding and the old thermocouple
Make good the thermocouple connection at the thermostat
Lock the thermocouple head to the burner bracket to the dimensions details. See thermocouple
setting
Oven Burner
Isolate the gas supply from the appliance
Remove the thermocouple and ignitor electrode
Remove the burner injector ( see Gas Conversion)
Remove the burner retaining screws
Replace the new burner and refit parts
Reconnect the gas supply
Check joints for leak free integrity
F A S 6 0 9
B U x x
F A S 6 3 0
IG 1 6
T C 3 3
J E xx
W A 1 3
C O 1 3 3
F A S 0 1 6
Fig 4
