Firman The Ultimate 4550 Скачать руководство пользователя страница 42

FIRMAN POWER EQUIPMENT INC.

Emission Control System Warranty

CALIFORNIA AND FEDERAL EXHAUST AND EVAPORATIVE EMISSIONS CONTROL WARRANTY STATEMENT

GASOLINE ENGINES

YOUR WARRANTY RIGHTS AND OBLIGATIONS

The California Air Resources Board, US Environmental Protection Agency (“US EPA”) and FIRMAN POWER EQUIPMENT INC.(FIRMAN)

 are pleased to explain the exhaust and evaporative emissions control systems warranty on your 2016-2017 or later Small Off-Road 

Engine (“SORE”) and engine powered equipment as applicable. In California and the USA, SORE and engine powered equipment

must 

be 

designed, 

built 

and 

equipped 

to 

meet 

California 

as 

applicable. 

In 

California 

and 

the 

USA, 

SORE 

and 

engine 

powered

equipment 

must 

be 

designed, 

built 

and 

equipped 

to 

meet 

California 

and 

US 

EPA 

stringent 

anti-smog 

standards. 

FIRMAN

must warrant the 

emissions 

control 

systems 

on your SORE and engine powered equipment for the 

period listed below provided 

there has been no abuse, neglect or improper maintenance of your SORE or engine powered equipment. Your exhaust emission 

control systems may include parts such as carburetors, fuel-injection systems, the ignition system, and catalytic converters. Also 

included 

may 

be 

an 

evaporative 

emission 

control 

system 

which 

may 

include 

fuel 

tanks, 

fuel 

lines, 

fuel 

caps, 

valves, 

canisters, 

filters, vapor hoses, clamps, connectors, belts and other associated components. For engines less than or equal to 80 cc, only the 

fuel tank is subject to the evaporative emission control warranty requirements of this section (California only).

OWNER'S WARRANTY RESPONSIBILITIES:

As the SORE or engine powered equipment owner, you are responsible for the performance of the required maintenance listed

in your owner’s manual. FIRMAN recommends that you retain all receipts covering maintenance on your SORE or engine powered 

equipment, but FIRMAN cannot deny warranty solely for the lack of receipts.

As the SORE or engine powered equipment owner, you should however be aware that FIRMAN may deny you warranty coverage 

if your SORE or engine powered equipment or a part has failed due to abuse, neglect, improper maintenance or unapproved 

modifications.

You are responsible for presenting your SORE or engine powered equipment to a FIRMAN distribution or service center as soon 

as a problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. If you have 

a question regarding your warranty coverage, you should contact FIRMAN at 1-844-347-6261 or [email protected].

GENERAL EMISSIONS WARRANTY COVERAGE

This emission control system is warranted for three years. The warranty period begins on the date the engine or equipment is delivered 

to an ultimate purchaser. FIRMAN warrants to the ultimate purchaser and each subsequent purchaser that the engine is:

Designed, built, and equipped so as to conform with all applicable regulations adopted by the Air Resources Board and US EPA; 

and Free from defects in materials and workmanship that cause the failure of a warranted part to be identical in all material 

respects to the part as described in the engine manufacturers application for certification.

The warranty on emissions-related parts is as follows:

(1) Any warranted part that is not scheduled for replacement as required maintenance in the owner's manual supplied, is 

warranted for the warranty period stated above. If any such part fails during the period of warranty coverage, the part will be 

repaired or replaced by FIRMAN at no charge to the owner. Any such part repaired or replaced under the warranty will be 

warranted for the remaining warranty period.

(2) Any warranted part that is scheduled only for regular inspection in the owner's manual supplied, is warranted for the warranty 

period stated above. Any such part repaired or replaced under warranty will be warranted for the remaining warranty period.

(3) Any warranted part that is scheduled for replacement as required maintenance in the owner's manual supplied, is warranted 

for the period of time prior to the first scheduled replacement point for that part. If the part fails prior to the first scheduled 

replacement, the part will be repaired or replaced by FIRMAN at no charge to the owner. Any such part repaired or replaced 

under warranty will be warranted for the remainder of the period prior to the first scheduled replacement point for the part.

(4) Repair or replacement of any warranted part under the warranty must be performed at no charge to the owner at a warranty 

station.

(5) Notwithstanding the provisions of Subsection (4) above, warranty services or repairs must be provided by FIRMAN that are 

franchised to service the subject engines.

(6) The owner must not be charged for diagnostic labor that leads to the determination that a warranted part is in fact defective, 

provided that such diagnostic work is performed at a warranty station.

(7) FIRMAN is liable for damages to other engine components proximately caused by a failure under warranty of any warranted 

part.

(8) Throughout the emissions warranty period defined in Subsection (b)(2), FIRMAN will maintain a supply of warranted parts 

sufficient to meet the expected demand for such parts.

(9) Any replacement part may be used in the performance of any warranty maintenance or repairs and must be provided without 

charge to the owner. Such use will not reduce the warranty obligations of the manufacturer.

(10) Add-on or modified parts that are not exempted by the Air Resources Board may not be used. The use of any non-exempted 

add-on or modified parts by the ultimate purchaser will be grounds for disallowing a warranty claim.
The manufacturer will not be liable to warrant failures of warranted parts caused by the use of a non-exempted add-on or modified 

part.

English                                                                                            

Page 

40

 

             

        Customer Service: 1-844-FIRMAN1

Содержание The Ultimate 4550













































Отзывы: