Firman P03602, Руководство пользователя, Страница: 9 / 32

Page 08
Install the Wheel Kit
[CAUTION]
The wheel kit is not intended for over - the - road
use .
Install the Support Leg
ASSEMBLY
Install the Handle
1. Place the handle
K
over the mounting channel
on the frame.
2. Secure the handle to the frame using the two
handle flange bolts
H (M8x45).
3. Place a flange nut F (M8) on the end of each
bolt and fasten securely with provided
wrenches.
DO NOT over tighten the flange nuts.
A
B
C
F
F
The generator requires some assembly priorto
usage. If problem arise when assembling the
generator, call 1-844-347-6261.
E
G
H
K
1. Before adding wheels, tip the generator on
it’s side.
2. Slide the axle pin(A) through the wheel.
3. Slide the axle pin(A) through the mount point
on the frame.
4. Secure the wheel and axle pin with the cotter
pin C.
5. Repeat steps 2-4 to attach another wheel.
1. Attach the support leg G to the generator
frame with flange bolts E (M8x16) and flange
lock nuts F(M8).
2. Tip the generator slowly so that it rests
on the wheels and support leg.
3.Tighten bolt E and nut F with provide
wrenches