1
DESCRIPTION
The MBCE-110/230UV modules provide visual indication and electrical outputs that
signal the user regarding flame presence in a combustion chamber. The module uses
Fireye UV scanners to sense flame presence independently or as components in a
burner management system. Many operational characteristics are provided including:
•
CE certified
•
Self-contained: 110 VAC, 50/60 Hz: MBCE-110UV-1, MBCE-110UV-2
MBCE-110UV-3, MBCE-110UV-4
230 VAC, 50/60 Hz: MBCE-230UV-1, MBCE-230UV-3
•
UV scanner compatible*
•
Flame ON/OFF LED indicator
•
4-20mA output permits direct reading of flame signal strength
•
Uses CE certified 11-pin relay base
•
Panel surface or DIN-rail mounting
•
Flame pull-in threshold adjustment
The module provides a cost effective method of monitoring flames using UV sensing.
The MBCE-UV is intended for non-permanent operation (burner must be recycled at
least once every 24 hours). The MBCE-UV is ideally suited for flame detection in nat-
ural gas applications; however, it can be used for flame detection in propane and light
fuel oil applications.
Check with Fireye for more details by contacting your local distributor or by check-
ing the Fireye home page at: www.fireye.com.
NOTE:
When the MBCE-110/230UV modules are used, additional means must be furnished to provide
those functions usually provided by flame safeguard control systems to meet local regulations (i.e.:
safe start check, valve closure, starting and running interlocks, safety timings, etc.).
The MBCE-UV shall be powered continuously from a separate source other than the Burner control
per EN 298.
* see ordering information
NOTICE: When Fireye products are combined with equipment manufactured by others and/
or integrated into systems designed or manufactured by others, the Fireye warranty, as stated
in its General Terms and Conditions of Sale, pertains only to the Fireye products and not to any
other equipment or to the combined system or its overall performance.
MBCE-110/230UV
Flame Sensor
Module
MBCE-1002
FEBRUARY 3, 2017
