background image

32 

NOTICE

When Fireye products are combined with equipment manufactured by others and/or integrated into

 

systems designed or manufactured by others, the Fireye warranty, as stated in its General Terms and

 

Conditions of Sale, pertains only to the Fireye products and not to any other equipment or to the 
combined system or its overall performance.

WARRANTIES

FIREYE guarantees for 

one year from the date of installation or 18 months from date of manufacture

 

of its products to replace, or, at its option, to repair any product or part thereof (except lamps and

 

photocells) which is found defective in material or workmanship or which otherwise fails to conform

 

to the description of the product on the face of its sales order. 

THE FOREGOING IS IN LIEU OF

 

ALL OTHER WARRANTIES AND FIREYE MAKES NO WARRANTY OF MERCHANT-
ABILITY OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED.

 Except as specifically

 

stated in these general terms and conditions of sale, remedies with respect to any product or part 
number manufactured or sold by Fireye shall be limited exclusively to the right to replacement or 
repair as above provided. In no event shall Fireye be liable for consequential or special damages of 
any nature that may arise in connection with such product or part.

FIREYE

BP-1001

3 Manchester Road

NOVEMBER 10, 2017

Derry, New Hampshire 03038 USA

Supersedes October 24, 2017

www.fireye.com

Содержание BurnerPRO BP110

































Отзывы: