Firetide HotPort 3100, Руководство пользователя

Страница: 11 / 19

HotPort 3103 Indoor Wireless Mesh Node
5
Building a Firetide Mesh Network
Installing, expanding, or even relocating a Firetide mesh network is easy and fast. Simply place a HotPort
node wherever y ou need an Ethernet port and connect it to an AC power source. As long as the HotPort
node is within operating range of other HotPort nodes, you can connect and operate your network devices
immediately. Although network planning is often not required for b asic installations, adhering to a few
simple guidelines will help ensure that your network performs reliably and gives you the full benefits and
performance that mesh networking has to offer.
Unpacking
Your HotPort 3103 package contains the following items :
•
HotPort 3103 Indoor Wireless Mesh Node
•
Two Antennas
•
AC Power Adapter with country -specific AC cord
•
User Manual
•
Warranty Card
•
End User License Agreement
•
Getting Started Guide
Easy Installation
Note: The HotPoint 3103 is an indoor only product. Any modi fication to the hardware or software
or enhancement of this product for use outdoors is strictly prohibited and will void your warranty
Attach Antennas
Attach both antennas to connectors on rear panel. Use only the antennas provided with the unit. Use of
other antennas not authorized by Firetide is prohibited.
Connect Ethernet devices
Plug up to four Ethernet devices into the rear ports on the HotPort 3103.
Add Power
Connect the HotPort unit to AC power source. Also, start up all connected Ethernet devic es.
All of the LEDs on the HotPort front panel will illuminate during startup before changing to their normal
state. Refer to page 9 for a description of the LED functions.