Fire Stone Home Products • Legacy Gas Grill • Rev. D
14
Figure 14
Step 8. Install Searing Plate and
Warming Grid
1. Parts Needed: Searing plate, stainless steel warming
grid, two warming grid legs (from parts Carton D).
2. Hold the searing plate with the three slots towards you
and set it into the back of the grill compartment. The
rear edge of the plate rests along the rear ledge of the
compartment and the front edge (with slots) rests on
top of the previously installed searing deck. See Figure 14.
Searing Plate
3. Insert the free ends of a warming grid leg into one dou
-
ble end of the warming grid with the bend of the leg to
the outside. Repeat on the opposite end.
Figure 15
4. Place the assembled warming grid to the rear of the grill
compartment above the searing plate. The legs will rest
on ledges along each side of the grill compartment. See
Figure 15.
Step 9. Install Cooking Grids
1. Parts/Items Needed: Cooking Grids (from parts Carton B).
2. Slide the cooking grids into the grill compartment. The
back edges will rest on the fixed cross member and the
front edges on the front ledge in the compartment. See
Figure 16.
Figure 16
Cooking Grids
Slots to Front
Searing Deck
Warming Grid
Warming Grid Leg
Ledge
