FIRESIDELODGEFURNITURE.COM | 877-568-6188
3
3. Bed rails have a tenon (tapered end of the log) on each end. Insert one end, or tenon, of Log Side Rail into the
2 1/2” mortise (round hole cut into head and foot boards). The bed rails have right angles cut into them the full
length of the rail. The right angles on the bed rails have a long flat-edge and a short flat-edge.
4. A correctly installed bed rail has the long flat-edge facing up. The slats for the mattress will sit on this edge.
When rails are correctly installed, the short flat-edge should be aligned vertically as seen below.
5. Insert one end of the Log Side Rails into 2 1/2” mortises (pre-drilled holes) on front side of headboard.
6. This step applies ONLY to Double/Single and Queen/Single bunk beds
a. These beds come without secondary bed rails. The Bed Rail Mortises are located on the jut-out post.
