FIRESIDELODGEFURNITURE.COM | 877-568-6188
6
15. Some tapping of support rails will be necessary to get the left assembly into mortises. Lift the Plywood over
the bunk rail (right or left side) and slip it into the top bunk mattress position (It may be necessary to slip
one assembled bunk rail out of the top holes to drop the plywood in). Important! For safety, the plywood
must be positioned so the gap to the headboard and to the footboard is 3” or less.
16. Using the 8- 1 5/8” Wood screws provided, screw the plywood down onto the bunk rail in 4 places on each
side.
17. Insert 6” Lag Screws into all bunk mortises and lightly tighten. Be sure to use washers with each lag screw.
18. Begin to tighten all Lag Screws securely. Starting from bottom bedrail, move from one to another in a rotation
until all 12 lag screws are securely fitted. Note: It is normal to hear some popping or cracking as rails become
firmly seated. Please make sure that you tighten completely this will ensure that your bunk bed will be VERY
sturdy.
19. Position log bed plugs into each 1 1/2” mortise.
This will conceal the lag screw heads and complete
your assembly.
20. Enjoy your Log Bunk Bed for many, many years!!
031314
04/17
