Optional Equipment
(for qualified installers only)
67
© Travis Industries
4/23/2021 - 1552
564 GSR2 35K CF
12 Insert a starter collar into
each of the (2) holes
that were uncovered in
the previous step and
bend the tabs to secure
the starter collar to the
fireplace. Seal the joints
with silicone caulk or
aluminum (U.L. 181A-P)
tape.
13 Install the fireplace into the framed chase. See section “Installation” in the manual.
14 Stretch the included flex to its maximum
length. Measure the distance between
the starter collars on the fireplace and
the inlets on the convection manifold.
Cut the flex to the appropriate length
and install between the fireplace and
the manifold. Secure using (3) screws
at every connection and seal the joints
with silicone caulk or aluminum (U.L.
181A-P) tape.
