Installation
(for qualified installers only)
11
© Travis Industries
4050714
93508093
Fireplace Placement
•
The fireplace must be secured to the floor (use the lifting handle brackets - see Figure 10).
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AA
AA
AA
AA
AA
AA
Travis Industries
recommends the chase
around the fireplace be
insulated. This insulation
should only be placed
between the framing
members and secured so
it does not fill the space
between the fireplace and
standoffs.
Bend this bracket down
on each side and nail it
to the floor, securing the
fireplace in position.
Lifting handles are available
separately (98500711). They
attach to the nail down brackets.
Standoffs (also
located on back)
The fireplace (and
firebox) must be made
level and plumb during
installation. Use shims
under the fireplace to
properly level the
fireplace.
Zero
Clearance
Can
Firebox
WARNING:
Failure to correctly level and plumb
this fireplace will lead to doors that
swing open or closed.
AAA
AAA
AAA
AAA
AAA
AAA
AAA
Figure 10
•
Fireplace must be placed directly on wood or non-combustible surface (not on linoleum or
carpet)
•
Fireplace must be installed on a level surface capable of supporting the fireplace and chimney
•
Place the ember strip included with the fireplace below the front edge of the fireplace (see
Figure 11).
Place this ember
strip under the front
of the fireplace and
the back edge of the
hearth.
NOTE: On the 36 Elite,
the ember strip will
need to be shortened.
The ember strip
insures no ember falls
between the fireplace
and hearth onto the
combustible floor.
EMBER STRIP
INSTRUCTIONS
Figure 11
