Firenzo DECO RURAL SD, Инструкция по установке и эксплуатации

Страница: 5 / 22

Deco RU SD & Plaza RU SD Installation
5
2. FLOOR PROTECTOR REQUIREMENTS
If the heater is to be placed on or within 500mm of a heat sensitive floor, an
insulated floor
protector will be required.
The insulated floor protector needs to extend under the heater and in front of the door. See
dimensions for floor protector. Similarly a 200mm extension is required on each side of the
door opening unless the insulated floor protector forms an abutment with a wall or heat shield
at a lesser distance.
The heater and floor protector must be fixed to the floor for seismic restraint. Anchor
points are provided in the feet of the unit.
INSULATED FLOOR PROTECTOR CONSTRUCTION
An
Insulated
Floor Protector shall consist of a minimum thickness of
40mm
consisting of
20mm of an approved insulation material material i.e. 2 sheets of 10mm micorboard or
superlux, 10mm tile backing board and 10mm tiles or similar on the top surface. All joints
on the upper surface should be sealed to prevent spilt ash from contacting any heat-sensitive
material.
FLOOR PROTECTOR DIMENSIONS
WHEN BEING INSTALLED IN A
MASONRY
FIRE PLACE
FLOOR PROTECTOR DEPTH
HEIGHT FROM FIRE BREAST
Level 520
20 460
40 330 (minimum)
INBUILT FLOOR PROTECTOR DIMENSIONS
WHEN INSTALLING IN A
BUILT IN FIRE CANOPY
( ZERO CLEARANCE BOX )
HEIGHT FROM FIRE BREAST
40mm 500
3. BUILT IN FIRE CANOPY
A Built In Fire Canopy is required if the fire is not being installed into a
masonry fire place.
For Built In Fire Canopy installations see details on pages 6 to 14.