TEMPERATURE button:
Turns heater
on and off.
NOTE:
Press the button for 5 seconds,
4.
Press once:
Touch panel
indicator becomes active.
5.
Press again
until desired setting
is reached. Digital display shows
setting circles as below:
LED Ember light button (1):
Makes
the color on bottom change.
NOTE:
Ember color effect stays on
until power button is turned off.
1.
Press once
. Ember color effect changes
2.
Press again
until desired setting
is reached, in total 10 colors
recycling.
LED Bottom light button (2):
NOTE:
Ember color effect stays on
until power button is turned off.
1.
Press once
. Ember color effect
gets changes automatically.
2.
Press again
Ember color effect
flashes automatically.
Temperature Limiting Control
This heater is equipped with a Temperature Limiting Control. Should the heater reach an
unsafe temperature, the heater will automatically turn OFF. To reset:
•
Unplug the power cord from the outlet.
•
Turn the ON/OFF switch on the CONTROL PANEL to OFF.
Wait 5 minutes.
•
Inspect the fireplace to make sure no vents are blocked, or clogged with dust or
lint. If they are, use a vacuum to clean the vent areas.
•
With the POWER switch in the OFF position, plug the power cord back into the
outlet.
•
If the problem continues, have your outlet and wiring inspected by a professional.
Remote Control Battery Information
•
This remote control uses CR2025
battery (included).
NOTICE
To improve operation,
aim
the remote control at the front of the fireplace.
DO NOT
press the buttons too quickly
. Give the unit time to respond to each command.
NEVER
dispose of batteries in
fi
re.
Failure to observe this precaution
may result in an
explosion
. Dispose of batteries at your local hazardous material processing center.
NOTICE
When the fireplace is first turned on, a slight odor may be present. This is normal and
should not occur again unless the fireplace is not used for a long period of time.
16
the temperature setting will switch from
°C to °F. Doing this will also switch from °F
to °C.
Makes the color on the bottom change/flash
automatically.
automatically.
