Page 19/43
Firemiks AB
Instruction manual version: SPFA FM
P.O. Box 8155, 104 20 STOCKHOLM, Sweden
phone +46-8-551 196 10 - [email protected] - www.firemiks.com
4.6.6.3 For alternative ways of fixating the unit, contact Firemiks AB.
4.6.7 Once the unit is installed horizontally, remove the plastic plug from the top of
the concentrate pump, and replace it with the supplied oil dipstick. The oil
dipstick is a secondary way to check the oil level and is also vented to remove
any pressure from the crank case during operation.
4.6.8 Be aware that the valves on the Firemiks are made of stainless-steel. If
assembling other stainless-steel threaded parts to the threads of the valves,
be sure to use suitable lubrication to avoid galling and the threads seizing
together permanently.
4.6.9 It is very important that there are no movements on the water main line that
could create tensions between the water motor inlet and outlet. If any such
movement exists on the connecting pipes, separate support(s) must be made
to stabilize the connection pipes before connecting to the FIREMIKS.
Alternatively, a flexible hose connection to the FIREMIKS is also a possibility.
4.6.10 Make sure there is enough space around the unit to enable easy access for
service and maintenance, especially on the back gable side of the water
motor (opposite side of the concentrate pump).
