FIREGUARD GLOBAL FG-BD100, Введение в продукцию

Страница: 4 / 9

FG-BD100 Connection Details
1. Terminal D1 (+) and D2 (-) for connecting Power supply
[24VDC]
2. Terminal S1 and S2 for connecting handheld programmer
when setting parameters, and then connecting to terminal
D1 and D2 respectively when finishing config
3. Terminal HJ1 and HJ2 for connecting Fire signal relay
output [Normally Open]
4. Terminal GZ1 and GZ2 for connecting Fault signal relay
output [Normally Close]
LED Indicators Colour Function
Fire Red Illuminates when at least one fire alarm event occur
Fault Yellow Illuminates when at least one fault alarm event occur in the Detector
Alignment Green Illuminates during the commissioning
FIREGUARD UK Technology Copyright ©2021, All right reserved.