Firegear OD42-N, Инструкция для владельца и по установке

Страница: 21 / 40

OD42 Outdoor Gas Fireplace
21
INSTALLATION
TWIG SET INSTALLATION
Installation of Refl ective Panels must be completed before installing the twig set.
Read the instructions below carefully and refer to the images. If
the twigs are broken do not use the unit until they are replaced.
Broken twigs can interfere with pilot operation.
Install 3lbs of fi reglass on the burner (follow fi reglass install
instructions in the unit manual) before installing twigs.
Improper positioning of the twigs may create carbon build-
up and can alter the unit's performance which is not covered
under warranty.
Twig kit # 326-930 contains the following pieces:
Part # Description
A x 1 Twig
B x 1 Twig
C x 1 Twig
D x 1 Twig
E x 1 Twig
Diagram 2
Diagram 1
F
E
D
C
B
A
A
C
1) Install twigs A and C on the burner as shown below. Orient the twigs in the same way and in a similar location on the left side of the burner as
depicted in Diagram 2.
2) Install twig B on the burner as shown below. Orient twig B across twig A in the same way and in a similar position as depicted in Diagram 3.
3) Install twig E on the right side of the burner as shown below. Orient twig E in the same way and in a similar position as depicted in Diagram 4.
Diagram 3
Diagram 4
A
B
E