REV. 4-10-17 Page 3
MSI-BSMTI Kit
NOTE:
Ensure the probes are aligned overtop of the
rainshield notched/cutout area and are spaced
approximately 1/8-inch apart from the end/tips, above the
burner leg (See Fig. 5 &7 Fig 8)
.
Step #5
The mounting plate has two holes in which to
install the Piezo module and the manual key valve. To
install the Piezo module use the smaller hole with the two
notches and slide module into the plate until it stops. Using
the plastic nut thread it onto the Piezo module to secure
into place. Careful not to turn the nut too tight and crack
the plastic. Install the AAA battery as shown and thread
the red button cap on the remaining threads of the module
(See Fig. 6).
Step #6
The manual key valve is designed to be installed
into the larger hole of the mounting plate by placing the
valve against the protruding bracket and rotating the
chrome flange clockwise until tight against the plate to
secure it into place as shown in Fig. 7
Fig. 5
Manual Valve Mounting
Plate (MT-FACEPLATE)
Piezo Ignitor
Chrome Flange
Manual Key Valve
+
-
AAA
Plastic Nut
Red Button Cap
Mounting Plate
Fig. 6
Fig. 7
