23
Kalea Bay LED Outdoor Fireplace
REV. 4-17-19 Page 17
Step 3:
Locate the wire grommets inside the firebox. See Fig. 16. Directly above them will be a series of mounting holes
for the windshield and LED retainer clips. Prepare the fireplace by installing the LED retainer clips. The retainer clips have
two holes in them. Install one (1) clip on the left and one (1) clip on the right side of the inner fireplace side wall. Install as
shown in Fig. 17.
Note:
if you are preparing a see-through fireplace you will install a total of (4) retainer clips two on open
side.
LED Retainer Clip
Fig. 17
Shows clip installed on right side of fireplace
Wire Grommets
Fig. 16
Locating wire grommets
Step 4
: Install the four (4) windshield clips, two on each side, one at the top and one with the LED retainer clip as shown
in Fig. 18.
Note:
if you are preparing a see-through fireplace you will install a total of (8) windshield clips, four on each
open side.
Fig. 18
Installing windshield clips
Precaution
: When installing windshield clips do
not secure the screws tight. They need to be loose
enough to allow the clip to move slightly and spin
around. Loose clips provide windshield to be easily
installed.
LED LIGHTING INSTALLATION
KALEA BAY: E LED
